KIT - Aktuelle Veröffentlichungen

Begutachtete Veröffentlichungen 2013 - Gas-Partikel-Systeme (GPS)
Titel	Autor	Quelle
The relationship between pressure drop and liquid saturation in oil-mist filters - Prediting filter saturation using a capillary based model	R. Mead-Hunter, R.D. Braddock, D. Kampa, N. Merkel, G. Kasper, B.J. Mullins	Separation and Purification Technology, 2013, 104, 121-129
Computational Fluid Dynamics (CFD) simulation of liquid aerosol coalescing filters	R. Mead-Hunter, A.J.C. King, G. Kasper, B.J. Mullins	Journal of Aerosol Science, 2013, DOI: http://dx.doi.org/10.1016/j.jaerosci.2013.03.009
Functionality based detection of airborne engineered nanoparticles in quasi real time: A new type of detector and a new metric	N. Neubauer, M. Seipenbusch, G. Kasper	Annals of Occupational Hygiene, 2013, doi: 10.1093/annhyg/met007

Begutachtete Veröffentlichungen 2012 - Gas-Partikel-Systeme (GPS)
Titel	Autor	Quelle
Comment on‘‘Performance evaluation of 3 optical particle counters with an efficient multimodal calibration method’’ (Heim etal.,2008) - Performance of improved counter	B.J. Mullins, D. Kampa, G. Kasper	Journal of Aerosol Science, 2012, 49, 48-50
A fast and accurate method of using electrical mobility scans for the direct measurement of aerosol charge distributions	M. Wild, J. Meyer, G. Kasper	Journal of Aerosol Science, 2012, 52 (Oct. 2012), 69-79
Sliding/Rolling phobic droplets along a fiber - measurement of interfacial forces	R. Mead-Hunter, T. Bergen, T. Becker, R. O’Leary, G. Kasper, B. Mullins	Langmuir, 2012, 28 (7), 3483-3488
Thin-film β-MoO3 Supported on α-Fe2O3 as a Shell–Core Catalyst for the Selective Oxidation of Methanol to Formaldehyde	G. Shi, T. Franzke, M.D. Sánchez, W. Xia, F. Weis, M. Seipenbusch, G. Kasper, M. Muhler	CHEMCATCHEM, 2012, 4 (6), 760–765
A numerical study of coagulation of nanoparticle aerosols injected continuously into a large, well stirred chamber	S. Anand, Y.S. Mayya, M. Yu, M. Seipenbusch, G. Kasper	Journal of Aerosol Science, 2012, Volume 52, October 2012, 18-32
Size resolved particle emission rates from an evolving indoor aerosol system	J. Koivisto, M. Yu, K. Hämeri, M. Seipenbusch	Journal of Aerosol Science, 2012, Volume 47, May 2012, 58-69

Begutachtete Veröffentlichungen 2011 - Gas-Partikel-Systeme (GPS)
Titel	Autor	Quelle
Coke formation in steam reforming of natural gas over rhodium/alumina catalysts: An Atomic Force Microscopy Study using the oscillating friction mode	C. Eßmann, F. Weis, M. Seipenbusch, T. Schimmel, O. Deutschmann	Zeitschrift für Physikalische Chemie, 2011, 225 (11-12), 1207-1224
Monitoring method for carbon nanotubes (CNT): Personal sampler and corresponding reading device	M. Keller, G. Kreck, Y. Holzapfel, N. Neubauer, M. Seipenbusch	Kück, H.: 4M Association: 4M 2011, 8th International Conference on Multi-Material Micro Manufacture. Proceedings: 8-10 November 2011, Stuttgart, Germany. Singapore: Research Publishing, 2011 pp. 149-155 ISBN: 978-981-07-0319-6 (Buch) ISBN: 978-981-07-0320-2 (CD-ROM)
An Aerosol-Process for the Synthesis of Nanostructured Molybdenum Oxide Catalysts by Integrated Chemical Vapour Synthesis/Chemical Vapour Deposition at Atmospheric Pressure	F. Weis, K. Gao, M. Seipenbusch, G. Kasper	Journal of Nanoscience and Nanotechnology, 2011, 11 (9), 8313-8317(5)
In-vitro cell exposure studies for the assessment of nanoparticle toxicity in the lung - A dialogue between aerosol science and biology	H.-R. Paur, R. R. Cassee, J. Teeguarden, H. Fissan, S. Diabate, M. Aufderheide, W. G. Kreyling, O. Hänninen, G. Kasper, M. Riediker, B. Rothen-Rutishauser, O. Schmid	Journal of Aerosol Science, 2011, 42, 668-692
Transfer functions and penetrations of five differential mobility analyzers for sub-2 nm particle classification	J. Jiang, M. Attoui, M. Heim, N. A. Brunelli, P. H. McMurry, G. Kasper, R. C. Flagan, K. Giapis, G. Mouret	Aerosol Science & Technology, 2011, 45, 480-492
Dimensional analysis of the cleaning pulse intensity in a surface filter test rig	J. Binnig, A. Bredin, J. Meyer, G. Kasper	Powder Technology, 2011, 211, 275-279
Observation of structure sensitive decomposition of Cp(allyl)Pd on Pd nanodots formed by MO-CVD	A. Binder, M. Seipenbusch, G. Kasper	Chemical Vapor Deposition, 2011, 17 (1-3), 54-57
The effect of water vapor on the particle structure and size of silica nanoparticles during sintering	V. Goertz, F. Weis, E. Keln, H. Nirschl, M. Seipenbusch	Aerosol Science & Technology, 2011, 45, 1287-1293
A highly sensitive technique for detecting catalytically active nanoparticles against a background of general workplace aerosols	N. Neubauer, F. Weis, A. Binder, M. Seipenbusch, G. Kasper	Journal of Physics: Conference Series, 2011, 304 (1), doi:10.1088/1742-6596/304/1/012011

Begutachtete Veröffentlichungen 2010 - Gas-Partikel-Systeme (GPS)
Titel	Autor	Quelle
Nanotechnologies, engineered nanomaterials and occupational health and safety - A review	K. Savolainen, L. Pylkkänen, H. Norppa, G. Falck, H. Lindberg, T. Tuomi, M. Vippola, H. Alenius, K. Hämeri, J. Koivisto, D. Brouwer, D. Mark, D. Bard, M. Berges, E. Jankowska, M. Posniak, P. Farmer, R. Singh, F. Krombach, P. Bihari, G. Kasper, M. Seipenbusch	Safety Sci., 2010, in press, DOI: 10.1016/j.ssci.2010.03.006
Charge dependent catalytic activity of gasborne nanoparticles	C. Peineke, P. Davoodi, M. Seipenbusch, A. Weber, A. Schmidt-Ott	J. Nanosc. Nanotechnol., accepted for publication 2010
Structure and density of deposits formed on filter fibers by inertial particle deposition and bounce	G. Kasper, S. Schollmeier, J. Meyer	Journal of Aerosol Science, 2010, 41, 1167-1182
Interparticle forces in silica nanoparticle agglomerates	M. Seipenbusch, S. Rothenbacher, M. Kirchhof, H.-J. Schmid, G. Kasper, A.P. Weber	J. Nanoparticle Reseaerch, 2010, 12, 2037-2044
Risk assessment of engineered nanomaterials and nanotechnologies - A review	K. Savolainen, H. Alenius, H. Norppa, L. Pylkkänen, T. Tuomi, G. Kasper	Toxicology, 2010, 269, 92-104
The efficiency of diffusional particle collection onto wire grids in the mobility equivalent size range of 1.2 to 8 nm	M. Heim, M. Attoui, G. Kasper	Journal of Aerosol Science, 2010, 41, 207-222
Sintering of Pd catalyst particles on SiO2-TiO2 carrier particles of different mixing ratios	A. Binder, M. Seipenbusch, G. Kasper	J. Phys. Chem. C, 2010, 114, 7816-7821

Begutachtete Veröffentlichungen 2009 - Gas-Partikel-Systeme (GPS)
Titel	Autor	Quelle
The collection efficiency of a particle-loaded single filter fiber	G. Kasper, S. Schollmeier, J. Meyer, J. Hoferer	Journal of Aerosol Science, 2009, 40 (12), 993-1009
Reconstruction algorithms for the internal packing density distribution of fibrous filter media based on tomographic data	J. Hoferer, L. M. Hoffmann, J. Goebbels, G. Last, W. Weil, G. Kasper	Filtration, 2009, 9 (2), 147-154
The influence of cake residence time on the stable operation of a high-temperature gas filter	N. Döring, J. Meyer, G. Kasper	Chemical Engineering Science, 2009, 64/10, 2483-2490
Scalable numerical tools for the flow and pressure drop computation in fibrous filter media	F. Strauß, J. Hoferer, V. Heuveline, G. Kasper	Chemical Engineering & Technology, 2009, 32/2, 820-825
Structural stabilization of metal nanoparticles by chemical vapor deposition-applied silica coatings	M. Seipenbusch, A. Binder	J. Phys. Chem. C, 2009, 113, 20606-20610
Kinetics and particle size effects in ethene hydrogenation over supported palladium catalysts at atmospheric pressure	A. Binder, M. Seipenbusch, M. Muhler, G. Kasper	Journal of Catalysis, 2009, 268 (1), 150-155
Temperature dependence of the work function of free nanoparticle agglomerates	K. Reuter-Hack, G. Kasper, A.P. Weber	Applied Physics A, 2009, 95, 629-634
Automated phase correction via maximization of the real signal	E. Hardy, J. Hoferer, D. Mertens, G. Kasper	Magnetic Resonance Imaging, 2009, 27/3, 393-400
Origin and mechanisms of dust emission from pulse-jet cleaning filter media	J. Binnig, J. Meyer, G. Kasper	Powder Technology, 2009, 189/1, 108-114

Begutachtete Veröffentlichungen 2008 - Gas-Partikel-Systeme (GPS)
Titel	Autor	Quelle
Concentration and size measurements of fly ash particles from the clean gas side of a pressurised pulverised coal combustion test facility	J. Meyer, H. Umhauer, K. Reuter, A. Schiel, G. Kasper, M. Förster	Powder Technology, 2008, 180 (1-2), 57-63
Performance evaluation of 3 optical particle counters with an efficient "multimodal" calibration	M. Heim, B.J. Mullins, H. Umhauer, G. Kasper	Journal of Aerosol Science, 2008, 39/12, 1019-1031
Temporal evolution of nanoparticle aerosols in workplace exposure	M. Seipenbusch, A. Binder, G. Kasper	Ann. Occup. Hyg., 2008, Vol. 52, No. 8, 707-716
Fragmentation and bond strength of airborne diesel soot agglomerates	S. Rothenbacher, A. Messerer, G. Kasper	Particle and Fibre Toxicology, 2008, 5/9
A novel device for single particle light scattering size analysis and concentration measurement at high pressures and temperatures	H. Umhauer, J. Meyer, A. Schiel	Part. Part. Syst. Charact., 2008, 25, 119-135
Influence of the residual carbon content of biomass fly ashes on the filtration performance of ceramic surface filters at high temperature	D. Hoff, J. Meyer, G. Kasper	Powder Technology, 2008, 180, 172-177
Effect of filtration velocity variations on the NOx conversion of catalytically impregnated filter elements	Niklas Döring, Jörg Meyer, Gerhard Kasper	Powder Technology, 2008, 180, 203-209

Begutachtete Veröffentlichungen 2007 - Gas-Partikel-Systeme (GPS)
Titel	Autor	Quelle
Capillarity in fibrous filter media: relationship to media properties	B. J. Mullins, R. D. Braddock, G. Kasper	Chemical Engineering Science, 2007, 62, 6191-6198
Calibration on an optical particle counter to provide PM2.5 mass for well-defined particle materials	J. Binnig, J. Meyer, G. Kasper	Journal of Aerosol Science, 2007, 38, 325-332
Deposition of Palladium Nanodots of Controlled Size and Density onto Surface-Modified SiO2 Particles by an Atmospheric Pressure CVS/MOCVD Process	A. Binder, A. Heel, G. Kasper	Chemical Vapor Deposition, 2007, 13, 48-54
Unipolar field and diffusion charging in the transition regime - Part I: A 2-D limiting-sphere model	A. Marquard	Aerosol Science & Technology, 2007, 41, 597-610
Unipolar field and diffusion charging in the transition regime - Part II: Charging experiments	A. Marquard, J. Meyer, G. Kasper	Aerosol Science & Technology, 2007, 41, 611-623
Detachment of liquid droplets from fibres - Experimental and theoretical evaluation of detachment force due to interfacial tension effects	B.J. Mullins, A. Pfrang, R.D. Braddock, T. Schimmel, G. Kasper	Journal of Colloid and Interface Science, 2007, 312, 333-340
Influence of the atmosphere on the thermal decomposition kinetics of the CaCO3 content of the PFBC coal flying ash	M.A. Gabal, D. Hoff, G. Kasper	Journal of Thermal Analysis and Calorimetry, 2007, 89/1, 109-116
The mixing state of fine powders measured by magnetic resoncance imaging	E.H. Hardy, J. Hoferer, G. Kasper	Powder Technology, 2007, 177 (1), 12-22
Research note: Measuring particle deposition within fibrous filter media by magnetic resonance imaging	J. Hoferer, E. H. Hardy, J. Meyer, G. Kasper	Filtration, 2007, 7 (2), 154-158
The effect of the contact between platinum and soot particles on the catalytic oxidation of soot deposits on a diesel particle filter	K. Hinot, H. Burtscher, A.P. Weber, G. Kasper	Applied Catalysis B: Environmental, 2007, 71, 271-278
The synthesis of ZrO2/SiO2 nanocomposites by the two-step CVD of a volatile halogen-free Zr alkoxide in a fluidized-bed reactor	W. Xia, Y. Wang, V. Hagen, A. Heel, G. Kasper, U. Patil, A. Devi, M. Muhler	Chemical Vapor Deposition, 2007, 13, 37-41
Particulate emissions from filter-based gas cleaning devices and their characterization according to PM 2.5 criteria	G. Kasper, J. Binnig, J. Meyer	Filtration, 2007, 7 (1), 49-54
First LDA-measurements of nanoparticle velocities in a low pressure impacting jet	K. Reuter-Hack, A.P. Weber, S. Rösler, G. Kasper	Aerosol Science and Technology, 2007, 41, 277-283

Begutachtete Veröffentlichungen 2006 - Gas-Partikel-Systeme (GPS)
Titel	Autor	Quelle
Characterization of unipolar electrical aerosol chargers - Part I: A review of charger performance criteria	A. Marquard, J. Meyer and G. Kasper	Journal of Aerosol Science, 2006, 37/9, 1052-1068
Characterization of unipolar electrical aerosol charges - Part II: Application of comparison criteria to various types of nanoaerosol charging devices	A. Marquard, J. Meyer, G. Kasper	Journal of Aerosol Science 2006, 37,9, 1069-1080
Catalytic behaviour of nickel nanoparticles: gasborne vs. supported state	A.P. Weber, P. Davoodi, M. Seipenbusch, G. Kasper	Journal of Nanoparticle Research, 8/3-4 (2006), 445-453
Comment on: "Clogging of fibrous filters by liquid aerosol particles: Experimental and phenomenological modeling study" by Frising et al.	B.J. Mullins, G. Kasper	Chemical Engineering Sciences, 2006, 61/18, 6223-6227
Highly resolved determination of structure and particle deposition in fibrous filters by MRI	J. Hoferer, M.J. Lehmann, E.H. Hardy, J. Meyer, G. Kasper	Chemical Engineering & Technology 29/7 (2006) 816-819
Comment on: Penetration of Ultrafine Particles and Ion Clusters Through Wire Screens by Ichitsubo et al.	M. Heim, B.J. Mullins and G. Kasper	Aerosol Science and Technology, 2006, 40, 144-145
Particle deposition from aerosol flow inside a T-shaped micro-mixer	M. Heim, R. Wengeler, H. Nirschl and G. Kasper	Journal of Micromechanics and Microengineering, 2006, 16, 70-76

Begutachtete Veröffentlichungen 2005 - Gas-Partikel-Systeme (GPS)
Titel	Autor	Quelle
Integration of cyclones and an optical particle counter into a filter tester VDI-3926/Type 1 to characterize PM2.5 emissions form pulse-jet cleaned filter media	J. Binnig, J. Meyer, G. Kasper	Gefahrstoffe Reinhaltung der Luft, 65/4 (2005), 163-168
Comparison of surface filter test rigs according to VDI 3926 and JIS Z 8909-1	J. Binnig, N. Mao, J. Meyer, M. Hata, G. Kasper, C. Kanaoka	Filtration, 5/4 (2005), 253-258
Production and characterization of Pd/SiO2 catalyst nanoparticles from a continuous MOCVS/MOCVD aerosol process at atmopheric pressure	A. Heel, G. Kasper	Aerosol Science and Technology, 39 (2005), 1027-1037
Electric fields coupled with ion space charge. Part I: Measurements	J. Meyer, A. Marquard, M. Poppner, R. Sonnenschein	Journal of Electrostatics 63 (2005), 775-780
Electric fields coupled with ion space charge. Part II: Computation	M. Poppner, R. Sonnenschein, J. Meyer	Journal of Electrostatics 83 (2005), 781-787
Nanoparticle charging efficiencies and related charging conditions in a wire-tube ESP at DC energization	A. Marquard, M. Kasper, J. Meyer and G. Kasper	Journal of Electrostatics, 2005, 63, 693-698
MRI as a key tool for understanding and modeling the filtration kinetics of fibrous media	M.J. Lehmann, E.H. Hardy, J. Meyer and G. Kasper	Magnetic Resonance Imaging, 2005, 23 (2), Sp.Issue, 341-342
Fibrous Filters: Non-Invasive Determination of Local 3D Structure by MRI	M.J. Lehmann, E.H. Hardy, J. Meyer and G. Kasper	Filtration, 2005, 5 (1), 62-67
Filtration Efficiency of Aerosol Particles Below 20 Nanometers	M. Heim, B. J. Mullins, M. Wild, J. Meyer and G. Kasper	Aerosol Science and Technology, 2005, 39, 782 - 789

Begutachtete Veröffentlichungen 2011/ 2012 - Verfahrenstechnische Maschinen (VM)
Titel	Autor	Quelle
DEM-Simulation of the Magnetic Field Enhanced Cake Filtration	C.Eichholz, H.Nirschl, Fei Chen, T.A.Hatton	AIChE Journal,58,3633-3644 (2012)
Festigkeitsuntersuchungen von Agglomeraten in Abhängigkeit der Herstellungsparameter in Intensivmischern	Valentin Wenzel, Regine Abele, Harald Anlauf, Hermann Nirschl, Stefan Gerl	Chemie Ingenieur Technik 20012, 84, No. 12, 1-11
Dipolar openable Halbach magnet designe for High-Gradient Magnetic Filtration	K. Menzel, C. W Windt, J. A. Lindner, Aymeé Michael, H. Nirschl	Separation and Purification Technology 105 (2013) 114-120
Small-Angle X-ray Scattering Study of the Formation of Colloidal SiO2 Stöber Multiplets	Verena Goertz, Alexander Gutsche, Nico Dingenouts, Hermann Nirschl	J. Phys. Chem. C 2012, 116, 26938−26946
Analysis of W1/O/W2 double emulsions with CLSM: Statistical image processing for droplet size distribution	S. Schuster, R. Bernewitz, G. Guthausen, J. Zapp, A. M. Greiner, K. Köhler, H. P. Schuchmann	Chemical Engineering Science 81 (2012), 84-90
Online Coupling of Size-Exclusion Chromatography and Low-Field 1H NMR Spectroscopy	M. Cudaj, G. Guthausen, T. Hofe, M. Wilhelm	Macromolecular Chemistry and Physics 213 (2012) 18, 1933-1943
Polystyrene Solutions: Characterization of Molecular Motional Modes by Spectrally Resolved Low- and High-Field NMR Relaxation	M. Cudaj, J. Cudaj, T. Hofe, B. Luy, M. Wilhelm, G. Guthausen	Macromolecular Chemistry and Physics 213 (2012) 17, 1833-1840
Novel Single Stage Wash Sedimentator for Purification and Separation of Small Particles	H. Anlauf, J. Jeras, M. Feist, J. Scheffler, M. Nussbaumer	Chemical Engineering & Technology 35 (2012) 9, 1664-1669
Screening of Colloids by Semicontinuous Centrifugation	L. E. Spelter, K. Meyer, H. Nirschl	Chemical Engineering & Technology 35 (2012), 1-10
Computational Fluid Dynamics (CFD) and Discrete Element Method (DEM) Applied to Centrifuges*	X. Romani, L. Spelter, H. Nirschl	Applied Computational Fluid Dynamics, Edited by Hyoung Woo Oh, ISBN 9789535102717, Chapter 6, S. 97-134
Filter Cake Washing of Mesoporous Particles	S. Noerpel, V. Siauw, H. Nirschl	Chemical Engineering & Technology 35 (2012) 4, 661-667
1H NMR Techniques for Characterization of Water Content and Viscosity of Fast Pyrolysis Oils	F. Dalitz, A. Steiwand, K. Raffelt, H. Nirschl, G. Guthausen	Energy & Fuels, 26 (2012), 5274-5280
Treatment of highly viscous lubricants by high gradient magnetic separation	K. Menzel, J. Lindner, H. Nirschl	Filtration 12 (2012) 2, 103-108
Evolution in der Trenntechnik – technische Entwicklung durch Mutation und Selektion	H. Anlauf	F & S Filtrieren und Separieren Global Guide 2012 – 2014, S. 230 - 238
Evolution in Separation – Technical Development by Mutation and Selection	H. Anlauf	F & S Filtrieren und Separieren Global Guide 2012 – 2014, S. 172 – 180
Considerations on the design of flow cells in by-pass systems for process analytical applications and its influence on the flow profile using NMR and CFD	F. Dalitz, M. Maiwald, G. Guthausen	Chemical Engineering Science 75 (2012) 318-326
Auf dem Weg zur Obnline-Rheo-TD-NMR in Bypassleitungen zur Analyse von (Batch-)Polymerisationsprozessen	H. Herold, E. H. Hardy, K.-H. Wassmer, N. Nestle	Chemie Ingenieur Technik 84 (2012) 1-2, 1-8
Process and reaction monitoring by low-field NMR spectroscopy	F. Dalitz, M. Cudaj, M. Maiwald, G. Guthausen	Progress in Nuclear Magnetic Resonance Spectroscopy, 60 (2012), 52-70
In-situ investigations on the curing of a polyester resin	M. A.Vargas, K. Sachsenheimer, G. Guthausen	Polymer Testing 31 (2012) 127–135
NMR on emulsions: Characterisation of liquid dispersed systems	R. Bernewitz, G. Guthausen, H. P. Schuchmann	Magn. Reson. Chem. 49 (2011) 93–104
Mechanical solid-liquid separation processes and techniques	H. Anlauf	Modern Drying Technology Volume 4, Edited by Evangelos Tsotsas, Arun S. Mujumdur, ISBN: 979-3-527-31559-8, Chapter 2, S. 47- 94
Wet particle classification below 1 µm – challenge for basic research and technical development	H. Anlauf	Filtration 11 (4) 2011, 223-229
SEC-MR-NMR: Online Coupling of Size Exclusion Chromatography and Medium Resolution NMR Spectroscopy	M. Cudaj, G. Guthausen, T. Hofe, M. Wilhelm	Macromol. Rapid Commun. 2011, 32, 665-670
Removal of magnetite particles and lubricant contamination from viscous oil by High-gradient Magnetic Separation Technique	K. Menzel, J. Lindner, H. Nirschl	Separation and Purification Technology (2011), 10.1016/j.seppur.2011.07.035
Primary charge effects on prolate spheroids with moderate aspect ratios	, H. Nirschl, W. Dörfler	Journal of Colloid and Interface Science 363 (2011) 690-702
Experimental study of gas-dynamically induced nanoparticles synthesis by use of adapted sampling probes	, D. Korp, N. Al-Hasan, M. Giglmaier, H. Nirschl	Chemical Engineering and Processing 50 (2011) 836-845
The Effect of Water Vapor on the Particle Structure and Size of Silica Nanoparticles During Sintering	, F. Weis, , H. Nirschl, M. Seipenbusch	Aerosol Science and Technology, 45: 1287-1293, 2011
Stokesian dynamics and the settling behaviour of particle–fibre-mixtures	, , H. Nirschl and W. Dörfler	The Canadian Journal of Chemical Engineering, (2011), 89: 682–690. doi: 10.1002/cjce.20415
Discontinuous powder mixing of nanoscale particles	B. Daumann, J. Weber, H. Anlauf, H. Nirschl	Chemical Engineering Journal 167 (2011) 377-387
Recovery of Iysozyme from hen egg white by selective magnetic cake filtration	C. Eichholz, M. Silvestre, M. Franzreb, H. Nirschl	Eng. Life Sci. 2011, 11, No. 1, 1-9
An Integral Approach to Master Physicochemical Properties in the Solid Chain of a Colloidal Pharmaceutical Product	, E. Akgün, H. Nirschl, N. Bieri, A. Schreiner	Separation Science and Technology, (2011), 46:46-53
Microscopic Measurement of the Homogeneity of Nanoscale Mixtures	B. Daumann, H. Nirschl	Ind. Eng. Chem. Res. 2011, 50, 877-882
A novel approach for determining the flow patterns in centrifuges by means of Laser-Doppler-Anemometry	, Johannes Schirner, Hermann Nirschl	Chemical Engineering Science 66 (2011), 4020 - 4028
Experimental and analytical modeling of the filtration mechanisms of a paper stack candle filter	, I. Rosenthal, H. Anlauf, H. Nirschl	Chemical Engineering Research and Design 89 (2011) 2776-2784

Begutachtete Veröffentlichungen 2010 - Verfahrenstechnische Maschinen (VM)
Titel	Autor	Quelle
Simulation der Schichtdickenverteilung bei elektrotauchemaillierten Bauteilen.	, H. Nirschl, E. Woldt	Email Mitteilungen des deutschen Email Verbandes e.V., 5/2010:76{80, 2010.
Separation of fibre fines and inorganic fines in recovered paper suspensions	G. Hirsch, S. Schabel, , H. Nirschl	Internationale Papierwirtschaft, 2010, 6, 20-23
Investigation of the nonlinear effects during the sedimentation process of a charged colloidal particle by direct numerical simulation	, , H. Nirschl, W. Dörfler	Journal of Colloid and Interface Science 344 (2010) 228–236
Mixing Agglomeration in a High-Shear Mixer with a Stirred Mixing Vessel	B. Daumann, X. Sun, H. Anlauf, S. Gerl, H. Nirschl	Chemical Engineering & Technology 33 (2010) 2, 321-326
Cake Filtration beyond the Possibilities of today`s Filter Press-continuous ultratin Film Filtration	H. Anlauf	Global Guid of Filtration and Seperation Industry, VDL- Publishing Hous, Rödermark (2010) 142-148, ISBN: 978-3-00-029751-9
Adaption of Optimum Washing Strategies to Product and Process Parameters in Centrifugal Processes	F. Ruslim, A. Erk, T. Danner, V. Wenzel, H. Nirschl	Chemical Engineering & Technology, 33 (2010) 8, 1311-1314
Efficiency Optimization and Prediction in High-Gradient Magnetic Centrifugation	J. Lindner, K. Wagner, C. Eichholz, H. Nirschl	Chemical Engineering & Technology, 33 (2010) 8, 1315-1320
Agglomeration and filtration of colloidal suspensions with DVLO interactions in simulation and experiment	B. Schäfer, M. Hecht, J. Harting, H. Nirschl	Journal of Colloid and Interface Science 349 (2010) 1, 186-195
Electrohydrodynamic transport in nanoporous packed beds	B. Schäfer, H. Nirschl	Chemical Engineering Science 65 (2010) 23, 6320-6326
Ein Spektrometer für die spektral aufgelöste Niederfeld-NMR	M. Cudaj, G. Guthausen, A. Kamlowski, D. Maier, T. Hofe, M. Wilhelm,	Nachrichten aus der Chemie, 10, 1155 (2010)
PFG-NMR on W1/O/W2-Emulsions: Evidence for Molecular Exchange between Water Phases	X. Guan, K. Hailu, G. Guthausen, F. Wolf, R. Bernewitz, H. P. Schuchmann	Eur. J. Lipid Sci. Technol., 112, 828 (2010)
On-line Low Field 1H-NMR Spectroscopy: monitoring of emulsion polymerization of butyl acrylate	M. A. Vargas, M. Cudaj, K. Hailu, K. Sachsenheimer, G. Guthausen	Macromolecules, 43, 5561 (2010)
In-situ Characterization of the Cure Reaction of HTPB and IPDI by Simultaneous NMR and IR Measurements	K. Hailu, G. Guthausen, W. Becker, A. König, A. Bendfeld, E. Geissler	Polymer Testing, 29, 513 (2010)
Classification of Fine Particles in High-Speed Centrifuges	, H. Nirschl	Chemical Engineering & Technology, Special Issue: Mechanical Solid Liquid Separation 33 (2010), 1276-1282
A Numerical Study of the Impact of Radial Baffles in solid Bowl Centrifuges Using computational Fluid Dynamics	, H. Nirschl	Physical Separation in Science and Engineering, vol. 2010, Article ID 510570, 10 pages, 2010. doi:10.1155/2010/510570
Superposed Filtration Mechaninsm during Clarification of Very Low Concentrated Suspension with a Paperstack Candle Filter	H. Anlauf,	Chemical Engineering Technology 33 (2010) 7, 1-8
Klärung sehr gering konzentrierter Suspensionen mit expandierbaren Papier-Spaltfilterkerzen	H. Anlauf,	Filtrieren und Separieren 24 (2010) 3, 110-116
Processing of dispersions containing fine particles or biological products in tubular bowl centrifuges	, A. Steiwand, H. Nirschl	Chemical Engineering Science 65 (2010), 4173-4181

Begutachtete Veröffentlichungen 2009 - Verfahrenstechnische Maschinen (VM)
Titel	Autor	Quelle
Investigation of hydrogenation of toluene to methylcyclohexane in a trickle bed reactor by low field NMR spectroscopy	G. Guthausen, A. von Garnier, R. Reimert	Appl. Spectr., 63 (10), 1121 (2009)
Preparation of W1/O/W2-Emulsions and Droplet-Size Distribution Measurements by Pulsed Field Gradient Nuclear Magnetic Resonance (PFG-NMR technique)	F. Wolf, L. Hecht, H. P. Schuchmann, E. H. Hardy, G. Guthausen	Eur. J. Lipid Sci. Technol., 111, 730 (2009)
Klärung sehr gering konzentrierter Suspensionen mit expandierbaren Papier-Spaltfilterkerzen	H. Anlauf,	Filtrieren und Separieren 24 (2010) 3, 110-116
Analysis of the porosity of filter cakes obtained by filtraton of colloid suspensions	, J. Ruland, H. Anlauf, H. Nirschl	Chemical Engineering Technology (2009) 32,No. 7, 1095-1101, DOI: 10.1002/ceat.200800609
Feststoffmischen im diskontinuierlichen Mischbetrieb mit bewegten Mischwerkzeugen	, H. Nirschl	Chemie Ingenieur Technik 81 (2009) 8, 1151
A new magnetic filter for selective bio separation	, M. Stolarski, H. Nirschl	Filtration Vol. 9, Nr. 3, (2009) 213-218
Multiphase CFD Simulation of a Solid Bowl Centrifuge	, H. Nirschl	Chemical Engineering Technology (2009) 32,No. 5, 719-725, DOI: 10.1002/ceat.200800531
Sedimentationsuntersuchungen zum Trennverhalten von Faser-Partikel-Suspensionen	, G. Hirsch, H. Nirschl	Chemie Ingenieur Technik 81 (2009) 6, 811-815
Determination of the energy consumption during the production of various concrete recipes	B. Daumann, H. Anlauf, H. Nirschl	Cement and Concrete Research 39 (2009), 590-599. Doi: 10.1016/j.cemconres.2009.04.001
Influence of pH and Compression on Electrohydrodynamic Effects in Nanoporous Paked Beds	B. Schäfer, H. Nirschl	Physical Separation in Science and Engineering (2009), Aritcle ID 817135, 8 Pages, DOI.: 10.1155/2009/817135
Evaluation of pathways for washing soluble solids	F. Ruslim, B. Hoffner, H. Nirschl, W. Stahl	Chemical Engineering Research and Design, Elsevier (2009) DOI.: 10.1016/j.cherd.2009.01007
Developments in Time Domain and Single Sides NMR	G. Guthausen, A. Kamlowski	Applications of Magnetic Resonance in Food Science, Challenges in a changing world (2009)
Comparison of Nanometric Particle Size Distributions as Determined by SAXS, TEM and Analytical Ultracentrifuge	, N. Dingenouts, H. Nirschl	Part. Part. Syst. Charact., 26 (2009), 17-24
The Influence of Temporal Cake Moisture Content on a Discontinuous Washing Process in the Centrifugal Field	F. Ruslim, H. Nirschl, W. Stahl	AIChE Journal, DOI 10.1002/aic, März 2009, 650-662 (2009)
Determination of the mixing time in a discontinuous powder mixer by using image analysis	B. Daumann, A. Fath, H. Anlauf, H. Nirschl	Chemical Engineering Science 64 (2009), 2320-2331. Doi:10.1016/j.ces.2009.01.032

Begutachtete Veröffentlichungen 2008 - Verfahrenstechnische Maschinen (VM)
Titel	Autor	Quelle
Investigations on the Separation Efficiency of Tubular Bowl Centrifuges	S. Stahl, , H. Nirschl	Chem. Eng. Technol. 31 (2008) 11, 1577-1583
Die selektive Magnetseparation auf dem Sprung in eine Industrielle Umsetzung	H. Nirschl, M. Stolarski, C. Eichholz, K. Keller	Chemie Ingenieur Technik 80 (2008) 9, 1413
Mechanische Flüssigkeitsabtrennung in der Lebensmittelverfahrenstechnik	H. Anlauf, H. Nirschl	Chemie Ingenieur Technik 80 (2008) 8, 1035-1044
Magnetic field enhanced cake filtration of superparamagnetic PVAc-particles	C. Eichholz, M. Stolarski, V. Goertz, H. Nirschl	Chemical Engeneering Science 63 (2008) 3293-3200, DOI:10.1016/j.ces.2008.03.034
Surface Rheology and Phase Transitions of Monolayers of Phospholipid/Cholesterol Mixtures	M. Vrânceanu, K. Winkler, H. Nirschl, G. Leneweit	Biophysical Journal Volume 9, May 2008, 3924-3934
Assessment of the Mixing efficiency of Solid Mixtures by Means of Image Analysis	B. Daumann, H. Nirschl	Powder Technology 182 (2008) 415-423, DOI: 10.1016/j.powtec.2007.07.2006
Physicochemical influences on electrohydrodynamic transport in compressible packed beds of colloidal boehmite particles	B. Schäfer, H. Nirschl	Journal of Colloid and Interface Science 318 (2008) 457-462
Distinghuishing between aggregates and agglomerates of flame-made TiO2 by high-pressure dispersion	A. Teleki, R. Wengeler, L. Wengeler, H. Nirschl, S. E. Pratsinis	Powder Technology 181 (2008) 292-300

Begutachtete Veröffentlichungen 2007 - Verfahrenstechnische Maschinen (VM)
Titel	Autor	Quelle
Experimental Results for the Settling Behaviour of Particle-Fiber Mixtures	, H. Nirschl, J. Wagner, G. Hirsch, S. Schabel	Physical Separation in Science and Engineering, vol. 2007, Article ID 91740, 6 pages, 2007. doi:10.1155/2007/91740
Filtermedien zur Kuchenfiltration - Schnittstelle zwischen Suspension und Apparat	H. Anlauf	Chemie Ingenieur Technik 79 (2007) 11, 1821-1931, DOI: 10.1002/cite.200700093
Einfluss der Physikochemie auf die Abtrennung nanoskaliger Partikel aus Flüssigkeiten	H. Nirschl	Chemie Ingenieur Technik 79 (2007) 11, 1797-1807, DOI: 10.1002/cite.200700107
Einfluss der Salzkonzentration auf das rheologische Verhalten wässriger anorganischer Suspensionen bei der Filtration	M. Hieke, H. Nirschl	Chemie Ingenieur Technik 79 (2007) 11, 1939-1944, DOI: 10.1002/cite.200700112
Prozessstrategien zur optimalen Reinigungsfähigkeit am Beispiel des Titus-Zentrifugentrockners TZT 400	S. Stahl, J. Ruland, H. Nirschl	Chemie Ingenieur Technik 79 (2007) 11, 1959-1986, DOI: 10.1002/cite.200700134
Calcium-Ion Removal from Peat by a Mechanical Filter Cake Washing Process	F. Ruslim, H. Nirschl, A. Mezhibor, L. Rikhvanov	Chem. Eng. Technol. 30 (2007) 8, 1055-1061
Sedimentation acceleration of remanent iron oxide by magnetic flocculation	M. Stolarski, Ch. Eichholz, B. Fuchs, H. Nirschl	China Particuology 5 (2007) 145-150, DOI: 10.1016/j.cpart.2007.01.005
Surface rheology of monolayers of phospholipids and cholesterol measured with axisymmetric drop shape analysis	M. Vrânceanu, K. Winkler, H. Nirschl, G. Leneweit	Colloids and Surface A: Physicochem. Eng. Aspects 311 (2007) 140-153, DOI: 10.1016/j.colsurfa.2007.06.008
Optimization of the wash liquor flow rate to improve washing of pre-deliquored filter cakes	F. Ruslim, H. Nirschl, W. Stahl, Ph. Carvin	Chemical Engineering Science 62 (2007) 3951-3961
A Microbiological Test Method to Determine the Cleanability of Filter Media in Solid-Liquid-Separation Applications	S. Stahl, S. Siggelkow, H. Nirschl	Eng. Life Sci. 7 (2007) 2, 136 - 142
Magnetfeldüberlagerte Pressfiltration	Ch. Eichholz, M. Stolarski, B. Fuchs, H. Nirschl	Chemie Ingenieur Technik 79 (2007) 4, 416 - 420
Characterizing Dispersion and Fragmentation of Fractal, Pyrogenic Silica Nanoagglomerates by Small-Angle X-ray Scattering	R. Wengeler, F. Wolf, N. Dingenouts, H. Nirschl	Langmuir 23 (2007) 4148 – 4154, DOI:10.1021/la063073q
Turbulent hydrodynamic stress induced dispersion and fragmentation of nanoscale agglomerates	R. Wengeler, H. Nirschl	Journal of Colloid and Interface Science 306 (2007) 262 - 273
Einflüsse auf die elektroosmotische Durchströmung von nanoporösen Haufwerken	B. Schäfer, H. Nirschl	Chemie Ingenieur Technik 79 (2007) 1-2, 161 - 166
Nanofluidics in filtration and particle processing	H. Nirschl, R. Wengeler, B. Schäfer	Filtration 7 (2007) 1, 67 - 74
Overview and recent developments in effective particle decontamination by washing processes	H. Anlauf	Filtration 7 (2007) 1, 20 - 25

Begutachtete Veröffentlichungen 2006 - Verfahrenstechnische Maschinen (VM)
Titel	Autor	Quelle
Newtonian and non-Newtonian low Re number flow through bead packings	D. Mertens, C. Heinen, E. H. Hardy	Chemical Engineering & Technology 29 (2006) 7, 828 - 831
Filtration of colloidal suspensions - MRI investigation and numerical simulation	A. Erk, E. H. Hardy, T. Althaus	Chemical Engineering & Technology 29 (2006) 7, 828 - 831
Magnetic field enhanced press-filtration	M. Stolarski, B. Fuchs, S. Bogale Kasse, Ch. Eichholz, H. Nirschl	Chemical Engineering Science 61 (2006) 6395-6403
Magnetic field enhanced cake filtration	B. Fuchs, M. Stolarski, W. Stahl, H. Nirschl	Filtration 6 (2006) 4, 333-339
Recent Developments in Research and Machinery of Solid-Liquid Separation Processes	H. Anlauf	Drying Technology 24 (2006) 1235-1241
Filterkuchenwäsche zur Aufreinigung löslicher kristalliner Feststoffpartikel	F. Ruslim, J. Fleischer, H. Nirschl, U. Peuker	Chemie Ingenieur Technik 78 (2006) 6, 715-719
Comparison of Comminution by Impact of Particle Collectives and Other Grinding Processes	A. Weber, U. Teipel, H. Nirschl	Chem. Eng. Technol. 29 (2006) 5, 642-648
High-Pressure Liquid Dispersion and Fragmentation of Flame-Made Silica Agglomerates	R. Wengeler, A. Teleki, M. Vetter, S. E. Pratsinis, H. Nirschl	Langmuir 22 (2006), 4928-4935
Particle deposition from aerosol flow inside a T-shaped micro-mixer	M. Heim, R. Wengeler, H. Nirschl and G. Kasper	Journal of Micromechanics and Microengineering, 2006, 16, 70-76
Studies on a micro hydrocyclone for liquid-liquid separation	R. Wengeler, H. Nirschl, F. Herbstritt, W. Ehrfeld	Filtration 6 (2006) 1, 21-26

Begutachtete Veröffentlichungen 2005 - Verfahrenstechnische Maschinen (VM)
Titel	Autor	Quelle
Distinction between Electrostatic and Electroviscous Effects on the Permeability of Colloidal Packed Beds	B. Schäfer, H. Nirschl	Chem. Eng. Technol. 28 (2005) 8, 862-866
Overlapping grids for the simulation of particle interaction at the micro scale	H. Nirschl	China Particuology 3 (2005) 1-2, 60-67

Begutachtete Veröffentlichungen - Angewandte Mechanik (AME)
Titel	Autor	Quelle
Ceramic Capillary Suspensions: Novel Processing Route for Macroporous Ceramic Materials	J. Dittmann, E. Koos, N. Willenbacher	J. Am. Ceram. Soc., 1–7 (2012) DOI: 10.1111/jace.12126
Determination of axial forces during the capillary breakup of liquid filaments – the tilted CaBER method	D. Sachsenheimer, B. Hochstein, H. Buggisch, N. Willenbacher	Rheologica Acta 51, 909–923 (2012)
Optimization of Experimental Parameters to Suppress Nozzle Clogging in Inkjet Printing	A. Lee, K. Sudau, K. H. Ahn, S. J. Lee, N. Willenbacher	Ind. Eng. Chem. Res. 51, 13195−13204 (2012)
Tuning suspension rheology using capillary forces	E. Koos, J. Johannsmeier, L. Schwebler, N. Willenbacher	Soft Matter 8 (24), 6620 - 6628 (2012)
Mixed wormlike micelles of cationic surfactants: effect of the cosurfactant chain length on the bending elasticity and rheological properties	C. Oelschlaeger, N. Willenbacher	Colloids and Surfaces A: Physicochemical and Engineering Aspects 406, 31-37 (2012)
Particle configurations and gelation in capillary suspensions	E. Koos, N. Willenbacher	Soft Matter 8 (14), 3988 - 3994 (2012)
Adhesive properties of acrylate copolymers: Effect of the nature of the substrate and copolymer functionality	Y. Peykova, O. Lebedeva, A. Diethert, P. Müller-Buschbaum, N. Willenbacher	International Journal of Adhesion & Adhesives 34, 107–116 (2012)
Effects of cross-link density on re-entrant melting of microgel colloids	M. Wiemann, N. Willenbacher, E. Bartsch	Colloids and Surfaces A: Physicochem. Eng. Aspects 413, 78-83 (2012)
Tailoring the near-Surface Composition Profiles of Pressure-Sensitive Adhesive Films and the Resulting Mechanical Properties	A. Diethert, K. Ecker, Y. Peykova, N. Willenbacher, P. Müller-Buschbaum	ACS Applied Material Interfaces 3, 2012–2021 (2011)
Kapillarkräfte in Suspensionen: Rheologische Eigenschaften und potenzielle Anwendungen	E. Koos, J. Dittmann, N. Willenbacher	Chemie Ingenieur Technik 83 (8), 1305–1309 (2011)
An alternative route to highly concentrated, freely flowing colloidal dispersions	N. Willenbacher, J. S. Vesaratchanon, O. Thorwarth, E. Bartsch	Soft Matter 7, 5777-5788 (2011)
Rheological Properties of Aqueous Solutions of Cetylpyridinium Chloride in the Presence of Sodium Chlorate	C. Oelschlaeger, N. Willenbacher	Rheologica Acta 50, 655–660 (2011)
Capillary Forces in Suspension Rheology	E. Koos, N. Willenbacher	Science 331, 897 (2011)
Capillary breakup extensional rheometry (CaBER) on semi-dilute and concentrated polyethyleneoxide (PEO) solutions	O. Arnolds, H. Buggisch, D. Sachsenheimer, N. Willenbacher	Rheologica Acta 49, 11, 1207 (2010)
Characterization of Complex Fluids at very Low Frequency: Experimental Verification of the Strain Rate-frequency Superposition (SRFS) Method	A. Kowalczyk, B. Hochstein, P. Stähle, N. Willenbacher	Applied Rheology 20, 52340 (2010)
Extensional rheology of concentrated emulsions as probed by capillary breakup elongational rheometry (CaBER)	K. Niedzwiedz, H. Buggisch, N. Willenbacher	Rheologica Acta 49, 1103–1116 (2010)
Clogging of microchannels by nano-particles due to hetero-coagulation in elongational flow	K. Georgieva, D.J. Dijkstra, H. Fricke, N. Willenbacher	Journal of Colloid and Interface Science 352, 265–277 (2010)
Near-Surface Composition Profiles and the Adhesive Properties of Statistical Copolymer Films Being Model Systems of Pressure Sensitive Adhesive Films	A. Diethert, Y. Peykova, N. Willenbacher, P. Müller-Buschbaum	ACS Applied Materials & Interfaces Vol. 2, No. 7, 2060-2068 (2010)
Effect of Counterion Binding Efficiency on Structure and Dynamics of Wormlike Micelles	C. Oelschlaeger, P. Suwita, N. Willenbacher	Langmuir 26 (10), 7045–7053 (2010)
Surface characterization of functionalized latexes with different surface functionalities using rheometry and dynamic light scattering	J. S. Vesaratchanon, K. Takamura, N. Willenbacher	Journal of Colloid and Interface Science, 345, 214–221 (2010)
The effect of surface roughness on adhesive properties of acrylate copolymers	Y. Peykova, S. Guriyanova, O. Lebedeva, A. Diethert, P. Müller-Buschbaum, N. Willenbacher	International Journal of Adhesion & Adhesives, 30, 245–254 (2010)
Mutations in Desmin's Carboxy-Terminal "Tail" Domain Severely Modify Filament and Network Mechanics	H. Bär, M. Schopferer, S. Sharma, B. Hochstein, N. Mücke, H. Herrmann, N. Willenbacher	Journal of Molecular Biology, 397, 1188–1198 (2010)
Capillary Breakup Extensional Rheometry of Yield Stress Fluids	K. Niedzwiedz, O. Arnolds, N. Willenbacher, R. Brummer	Applied Rheology 19, 41969 (2009)
Desmin and vimentin intermediate filament networks: Their viscoelastic properties investigated by mechanical rheometry	M. Schopferer, H. Bär, B. Hochstein, S. Sharma, N. Mücke, H. Herrmann, N. Willenbacher	Journal of Molecular Biology, 388, 133–143 (2009)
Microrheology with Fluorescence Correlation Spectroscopy	S. Rathgeber, H.-J. Beauvisage, H. Chevreau, N. Willenbacher, C. Oelschlaeger	Langmuir 25(11), 6368-6376 (2009)
Polyisobutene-Based Pressure-Sensitive Adhesives	N. Willenbacher, O. Lebedeva	I. Benedek and M.M. Feldstein (Eds), Handbook of Pressure Sensitive Adhesives and Products, Taylor and Francis Group, Boca Raton (2009)
Linear-to-Branched Micelles Transition: A Rheometry and Diffusing Wave Spectroscopy (DWS) Study	C. Oelschlaeger, M. Schopferer, F. Scheffold, N. Willenbacher	Langmuir, 25(2), 716-729 (2009)
Shear and elongational flow behavior of acrylic thickener solutions, Part II: effect of gel content	S. Kheirandish, I. Gubaydullin, N. Willenbacher	Rheologica Acta 48, 397-407 (2009)
Effect of aggregation on shear and elongational flow properties of acrylic thickeners	N. Willenbacher, Y. Matter, I. Gubaydullin, V. Schädler	Korea-Australia Rheology Journal, 20(3), 109-116 (2008)
Shear and elongational flow behavior of acrylic thickener solutions, Part I: Effect of intermolecular aggregation	S. Kheirandish, I.Gubaydullin, W.Wohlleben, N.Willenbacher	Rheologica Acta, DOI 10.1007/s00397-008-0292-1 (2008)
Multiple-Particle Tracking (MPT) Measurements of Heterogeneities in Acrylic Thickener Solutions	C. Oelschlaeger, N. Willenbacher, S. Neser	Progress in Colloid and Polymer Science, 134, 74-79 (2008)
Broad Bandwidth Optical and Mechanical Rheometry of Wormlike Micelle Solution	N. Willenbacher, C. Oelschlaeger, M. Schopferer, P. Fischer, F. Cardinaux, F. Scheffold	Physical Review Letters, 99, 068302 (2007)
Dynamics and structure of complex fluids from high frequency mechanical and optical rheometry	N. Willenbacher, C. Oelschlaeger	Current Opinion of Colloid & Interface Science, 12, 43-49 (2007)
Chemical Force Microscopy Study of Adhesive Properties of Polypropylene Films: Influence of Surface Polarity and Medium	S. Gourianova, N. Willenbacher, M. Kutschera	Langmuir, 21(12), 5429-5438 (2005)
Characterization of the Viscoelastic Behavior of Complex Fluids using the Piezoelastic Axial Vibrator (PAV)	J. Crassous, R. Régisser, M. Ballauff, N. Willenbacher	Journal of Rheology, 49(4), 851-864 (2005)
Vesicles as Rheology Modifier	P. Fernandez, N. Willenbacher, T. Frechen, A. Kühnle	Colloids and Surfaces A, Physicochemical + Engineering Aspects, 262(1-3), 204-210 (2005)
The Influence of Extensional Properties on the dewatering of Coating Colors	J. Jäder, N. Willenbacher, G. Engström, L. Järnström	Journal of Pulp and Paper Science, 31(4), 181-187 (2005)
Microscopic structure in pressure sensitive adhesives: an ultrasmall angle X-ray study	E. Maurer, S. Loi, D. Wulff , N. Willenbacher, P. Müller-Buschbaum	Physica B, 357 144-147 (2005)