| UFP, BC, and PM2.5 measurements and the effect of dispersion conditions on concentration levels in a residential area affected by wood smoke pollution from domestic heating during the winter months |
Bächler, P., Weis, F., Kohler, S., Dittler, A. |
Aerosol Research, Article, Volume 4, Issue 1, AR, 4, 63-80, 2026, https://doi.org/10.5194/ar-4-63-2026 |
| Generation of ash particles from different lube oil mists |
J.R.D. Thieringer, A. K. Watzek, J. Meyer, A. Dittler |
Aerosol Science & Technology, 2022, Vol, 56, No. 8, 744-756, https://doi.org/10.1080/02786826.2022.2073192 (open access) |
| Loss of nanoparticles in a particulate matter sampling system applied for environmental ultrafine particle measurements |
J. Zoller, J. Gulden, J. Meyer, A. Dittler |
Aerosol Science and Engineering, 2020, 4, 50-63, https://doi.org/10.1007/s41810-020-00054-6 (open access) |
| Experimental investigation of reactive-inert particulate matter detachment from metal fibres at low flow velocities and different gas temperatures |
J. Zoller, A. Zargaran, K. Braschke, J. Meyer, U. Janoske, A. Dittler |
Aerosol Science and Engineering, 2020, https://doi.org/10.1007/s41810-020-00081-3 (open access) |
| Analytical and numerical calculation of the detachment of particle structures from fibres |
K. Braschke, J. Zoller, A. Zargaran, A. Dittler, U. Janoske |
Aerosol Science and Technology, 2021, https://doi.org/10.1080/02786826.2021.1972085 |
| Measurement of transient nanoparticle emissions of pulse-jet cleaned filters applying an engine exhaust particle sizer |
P. Bächler, J. Meyer, A. Dittler |
Aerosol Science and Technology, 2022, Vol. 56, No. 4, 394-402, https://doi.org/10.1080/02786826.2022.2027335 |
| A newly developed dilution system for optical particle size and concentration measurements in oil-injected scres compressors |
J.C. Deichmann, C. Straube, J. Eisengräber-Pabst, T. Grein, J. Meyer, A. Dittler |
Aerosol Science and Technology, 2023, https://doi.org/10.1080/02786826.2023.2209623 |
| On aerosol formation by condensation of oil vapor in the crankcase of combustion engines |
N. Nowak, T. Sinn, K. Scheiber, C. Straube, J. Pfeil, J. Meyer, T. Koch, G. Kasper, A. Dittler |
Aerosol Science and Technology, https://doi.org/10.1080/02786826.2021.1976720 |
| Impact of ambient air filters on PM concentration levels at an urban traffic hotspot (Stuttgart, Am Neckartor) |
P. Bächler, T.K. Müller, T. Warth, T. Yildiz, A. Dittler |
Atmospheric Pollution Research, 2021, 12, 101059, https://doi.org/10.1016/j.apr.2021.101059 (open access) |
| Opportunities for low-cost particulate matter sensors in filter emission measurements |
A.D. Schwarz, J. Meyer, A. Dittler |
Chemical Engineering & Technology, 2018, https://doi.org/10.1002/ceat.201800209 |
| Impact of seams on the operating behavior of surface filters regarding particle emissions |
C.R. de Lacerda, P. Bächler, A.D. Schwarz, R. Sartim, M.L. Aguiar, A. Dittler |
Chemical Engineering & Technology, 2022, 45, No. 7, 1354-1362, https://doi.org/10.1002/ceat.202200132 |
| Humidity considerations in filter testing based on analysis of filters from gas turbine applications |
A.D. Schwarz, J. Dutzi, P. Weber, C. Sattler, K. Schulz, T. Caesar, J. Meyer, A. Dittler |
Chemical Engineering & Technology, 2022, https://doi.org/10.1002/ceat.202100344 (open access) |
| Operating behavior of pulse jet-cleaned filters regarding energy demand and particle emissions - Part 1: Experimental parameter study |
P. Bächler, J. Meyer, A. Dittler |
Chemical Engineering & Technology, 2023, 46, https://doi.org/10.1002/ceat.202300080 (open access) |
| Operating behavior of pulse jet-cleaned filters regarding energy demand and particle emissions - Part 2: Modeling |
P. Bächler, J. Meyer, A. Dittler |
Chemical Engineering & Technology, 2024, 47, https://doi.org/10.1002/ceat.202300409 (open access) |
| Reactivity Influence on Carbonaceous Particle Layer Break-up and Relocation Events in O2-based Model Filter Regeneration |
Desens, O., Yavuz, Ö., Hagen, F. P., Meyer, J., Dittler, A. |
Chemical Engineering Science, 29 January 2026, 123467, https://doi.org/10.1016/j.ces.2026.123467 |
| Measurement and simulation of the vacuum contact drying of pastes in a LIST-type kneader drier |
A. Dittler. T. Bamberger, D. Gehrmann, E.-U. Schlünder |
Chemical Engineering and Processing, 1997, 36, 301-308 |
| Simulation of operational behaviour of patchily regenerated, rigid gas cleaning filter media |
A. Dittler, G. Kasper |
Chemical Engineering and Processing, 1999, 38, 321-327 |
| Kontinuierliche Dosierung und Dispergierung feindisperser, kohäsiver Feststoffe mit einem neuartigen Staubdosier |
A. Dittler, G. Kasper |
Chemie Ingenieur Technik, 1999, 71, 685-688 |
| Einfluss ausgewählter Medienstrukturparameter auf das Betriebsverhalten von Öllnebelfiltern |
T. Penner, W. Heikamp, J. Meyer, A. Dittler |
Chemie Ingenieur Technik, 2019, 91, No. 11, 1615-1622, DOI: 10.1002/cite.201900018 |
| Applied geometry optimization of an innovative 3D-printed wet-scrubber nozzle with a Lattice Boltzmann method |
F. Reinke, N. Hafen, M. Haussmann, M. Novosel, M.J. Krause, A. Dittler |
Chemie Ingenieur Technik, 2022, 94, No. 3, 348-355, https://doi.org/10.1002/cite.202100151 (open access) |
| Auswirkungen eines erhöhten Wassergehalts auf lösliche Staubkuchenbestandteile in der Oberflächenfiltration - Teil 1: Theoretische Betrachtungen |
A.D. Schwarz, D. Horst, J. Meyer, Q. Zhang, A. Dittler, E. Schmidt |
Chemie Ingenieur Technik, 2022, 94, No.8, https://doi.org/10.1002/cite.202100158 (open access) |
| Auswirkungen eines erhöhten Wassergehalts auf lösliche Staubkuchenbestandteile in der Oberflächenfiltration – Teil 2: Experimentelle Untersuchungen |
A.D. Schwarz, D. Horst, J. Meyer, Q. Zhang, A. Dittler, E. Schmidt |
Chemie Ingenieur Technik, 2022, 94, No.8, https://doi.org/10.1002/cite.202100213 (open access) |
| Spatially resolved online leak detection in a baghouse filter applying low-cost PM-sensors |
P. Bächler, J. Meyer, A. Dittler |
Chemie Ingenieur Technik, 2023, 95, No. 1-2, https://doi.org/10.1002/cite.202200116 (open access) |
| Gasreinigung mit starren Filterelementen - Ursachen und Auswirkungen unvollständiger Filterregenerierung |
A. Dittler, G. Kasper |
Chemie-Ingenieur-Technik, 2000, 72, 1013-1014 |
| Simulation of particulate matter structure detachment from surfaces of wall-flow filters applying lattice Boltzmann methods |
N. Hafen, A. Dittler, M.J. Krause |
Computers & Fluids, 2022, https://doi.org/10.1016/j.compfluid.2022.105381 |
| Stellungnahme des "Expertenkreises Aerosole": Aerosole und SARS-CoV-2 - Entstehung, Infektiosität, Ausbreitung und Minderung luftgetragener virenhaltiger Teilchen in der Atemluft |
S. Brockmann, A. Dittler, G. Grün, M. Haibel, T. Iftner, H.-G. Kräusslich, B. Mizaikoff, J. Niessner, B. Richter, C. Spahn, K. Stergiaropoulos, H. von Braun |
Das Gesundheitswesen, 2021, 83, 231-234, DOI: 10.1055/a-1363-0972 |
| In situ tracking of break-up, resuspension, and transport of reactive particle structures in a single wall-flow filter channel |
J.R.D. Thieringer, H. Werling, J. Meyer, A. Dittler |
Emission Control Science and Technology, 2023, https://doi.org/10.1007/s40825-023-00228-x (open access) |
| Experimental analysis of droplet coalescence and transport mechanisms on a single vertical fiber |
A. Schwarzwälder, J. Meyer, A. Dittler |
Experiments in Fluids, 2023, 64, 103, https://doi.org/10.1007/s00348-023-03628-5 (open access) |
| Simulation of dynamic rearrangement events in wall-flow filters applying Lattice Boltzmann methods |
N. Hafen, J.E. Marquard, A. Dittler, M.J. Krause |
Fluids 2023, 8, 213. https://doi.org/10.3390/fluids8070213 (open access) |
| Simulation of particulate matter structure detachment from surfaces of wall-flow filters for elevated velocities applying lattice Boltzmann methods |
N. Hafen, J.E. Marquardt, A. Dittler, M. Krause |
Fluids 2023, 8, 99. https://doi.org/10.3390/fluids8030099 (open access) |
| Einfluss von Regerierungsgrad und -muster auf den Restdruckverlust starrer Oberflächenfilterelemente |
A. Dittler, G. Kasper |
Gefahrstoffe - Reinhaltung der Luft, 1999, 59 7/8, 299-303 |
| Characterization of the emission behavior of pulse-jet cleaned filters using a low-cost particulate matter sensor |
P. Bächler, J. Meyer, A. Dittler |
Gefahrstoffe Reinhaltung der Luft 79, 2019, 79, Nr. 11-12, 443-450 |
| Exploratory measurements of ambient air quality in a residential area applying a diffusion charge based UFP monitor |
P. Bächler, F. Weis, S. Kohler, A. Dittler |
Gefahrstoffe, 2024, 84, 01-02, 15-22, https://doi.org/10.37544/0949-8036-2024-01-02-17 |
| A mesoscale model for the relationship between efficiency and internal liquid distribution of droplet mist filters |
H.E. Kolb, A.K. Watzek, V. Zaghini Francesconi, J. Meyer, A. Dittler, G. Kasper |
Journal of Aerosol Science, 2018, 123, 219-230, https://doi.org/10.1016/j.jaerosci.2018.05.013 |
| Impact of water droplet and humidity interaction with soluble particles on the operational performance of surface filters in gas cleaning applications |
A.D. Schwarz, L. König, J. Meyer, A. Dittler |
Journal of Aerosol Science, 2020, 142, 105523, https://doi.org/10.1016/j.jaerosci.2020.105523 (open access) |
| Simultaneous measurement of spatially resolved particle emissions in a pilot plant scale baghouse filter applying distributed low-cost particulate matter sensors |
P. Bächler, J. Szabadi, J. Meyer, A. Dittler |
Journal of Aerosol Science, 2020, 150, 105644, https://doi.org/10.1016/j.jaerosci.2020.105644 (open access) |
| Morphology of particulate deposits formed on a single filter fibre by exposure to mixed aerosol flow |
J. Zoller, A. Zargaran, K. Braschke, J. Meyer, U. Janoske, A. Dittler |
Journal of Aerosol Science, 2020, https://doi.org/10.1016/j.jaerosci.2020.105718 |
| A novel method to investigate detachment of particulate structures from an elastic single fiber at low gas flow velocities |
L. Poggemann, J. Meyer, A. Dittler |
Journal of Aerosol Science, 2021, 156, 105785, https://doi.org/10.1016/j.jaerosci.2021.105785 (open access) |
| A critical note on filtering-face-piece filtration efficiency determination applying EN 149 |
J. Zoller, J. Meyer, A. Dittler |
Journal of Aerosol Science, 2021, 158, 105830, https://doi.org/10.1016/j.jaerosci.2021.105830 |
| Simultaneous temporal, spatial and size-resolved measurements of aerosol particles in closed indoor environments applying mobile filters in various use-cases |
J. Szabadi, J. Meyer, M. Lehmann, A. Dittler |
Journal of Aerosol Science, 2022, 160, 105906, https://doi.org/10.1016/j.jaerosci.2021.105906 |
| In situ characterization of particle structures generated at different flow velocities on a single fiber in the gas phase |
J. Szabadi, J. Meyer, A. Dittler |
Journal of Aerosol Science, 2023, 106197, https://doi.org/10.1016/j.jaerosci.2023.106197 |
| Investigation of the potential of in-line particle concentration measurements in gas particle separation processes by using low-cost particulate matter sensors |
F. Reinke, J. Meyer, A. Dittler |
Journal of Aerosol Science, 2024, 106476, https://doi.org/10.1016/j.jaerosci.2024.106476 (open acess) |
| Characterization of mesoscale inhomogeneity in nonwovens and its relevance in the filtration of fine mists |
T. Penner, J. Meyer, A. Dittler |
Journal of Aerosol Science, January 2021, volume 151, 105674, https://doi.org/10.1016/j.jaerosci.2020.105674 (open access) |
| Sampling and conditioning of engine blow-by aerosols for representative measurements by optical particle counter |
N. Nowak, K. Scheiber, J. Pfeil, J. Meyer, A. Dittler, T. Koch , G. Kasper |
Journal of Aerosol Science, October 2020, Volume 148, 105612, https://doi.org/10.1016/j.jaerosci.2020.105612 |
| Experimental investigation on the change of pull-off force between bulk particulate material and an elastic polymeric filter fiber |
L. Poggemann, R. Thelen, J. Meyer, A. Dittler |
Journal of Collid and Interface Science, 2023, 641, 903-915, https://doi.org/10.1016/j.jcis.2023.03.051 |
| Numerical investigation of detachment and transport of particulate sturctures in wall-flow filters using lattice Boltzmann methods |
N. Hafen, J.R.D. Thieringer, J. Meyer, M.J. Krause, A. Dittler |
Journal of Fluid Mechanics, 2023, 956, A30, https://www.doi.org/10.1017/jfm.2023.35, (open access) |
| Generation, characterization and comparison of human exhaled and technical aerosols for the evaluation of different air purifying technologies against infectious aerosols |
T. Penner, S. Berger, J. Niessner, A. Dittler |
Journal of Occupational and Environmental Hygiene, 2022, https://doi.org/10.1080/15459624.2022.2125520 |
| Penetration of water-soluble material through gas-cleaning filters |
A.D. Schwarz, J. Meyer, A. Dittler |
Membranes 2022, 12, 776, https://doi.org/10.3390/membranes12080776 |
| Application of python image analysis tools for particle structure detachment detection in high‑speed videos during model filter regeneration |
Desens, O., Meyer, J., Dittler, A. |
MethodsX, Volume 15, December 2025, 103598, https://doi.org/10.1016/j.mex.2025.103598 |
| Experimental and numerical investigation of droplet–fiber interaction on mechanically excited fiber |
A. Schwarzwälder, F. Freese, J. Meyer, K, Loganathan, H. Tietze, A. Dittler, U. Janoske |
Physics of Fluids 2024, 36, 032006, https://doi.org/10.1063/5.0188784 |
| Experimental analysis of water-droplet-fiber interaction on a mechanically excited hydrophobic fiber |
A. Schwarzwälder, J. Meyer, A. Dittler |
Physics of Fluids, 2024, 36, 012010, https://doi.org/10.1063/5.0178183 |
| Optical in situ measurement of dust cake thickness distributions on rigid filter media for gas cleaning |
A. Dittler, B. Gutman, R. Lichtenberger, H. Weber, G. Kasper |
Powder Technology, 1998, 99/2, 177-184 |
| The influence of conditioning and regeneration on the separation behaviour of rigid surface filters at the separation of particles from gases |
A. Dittler, H.F. Umhauer |
Powder Technology, 2001, 120/3, 223-231 |
| Patchy cleaning of rigid gas filters - Transient regeneration phenomena comparison of modelling and experiment |
A. Dittler, M. Ferer, P. Mathur, P. Djuranovic, G. Kasper, D.H. Smith |
Powder Technology, 2002, 124/1-2, 55-66 |
| Fast adhesion calculation for collisions between arbitrarily shaped particles and a wall |
K.O. Braschke, J. Zoller, F. Freese, A. Dittler, U. Janoske |
Powder Technology, 2022, https://doi.org/10.1016/j.powtec.2022.117494 |
| Implications for the energy-evaluation of pulse-jet cleaned surface filter media regarding filter operation during typical test procedures |
Bächler, P., Meyer, J., Dittler, A. |
Powder Technology, 7 November 2025, 121889, https://doi.org/10.1016/j.powtec.2025.121889 |
| Discrete element method simulation of particulate material fracture behavior on a stretchable single filter fiber with additional gas flow |
E. Asylbekov, L. Poggemann, A. Dittler, H. Nirschl |
Powders, 2024, 3, 367-391, https://doi.org/10.3390/powders3030021 (open access) |
| Process integrated monitoring of spatially resolved particle emissions of a baghouse filter using a network of low-cost PM-sensors |
P. Bächler, V. Löschner, J. Meyer, A. Dittler |
Process Safety and Environmental Protection, 2022, 160, 411-423, https://doi.org/10.1016/j.psep.2022.02.005 |
| Measurement of transient nanoparticle emissions of a municipal biomass incineration plant equipped with pulse-jet cleaned filters |
P. Bächler, J. Meyer, R. Ligotski, P. Krug, A. Dittler |
Process Safety and Environmental Protection, 2024, https://doi.org/10.1016/j.psep.2024.02.013 (open access) |
| Impact of residential real-world wood stove operation on air quality concerning PM2.5 immission |
J.R.D. Thieringer, J. Szabadi, J. Meyer, A. Dittler |
Processes 2022, 10, 545, https://doi.org/10.3390/pr10030545 (open access) |
| Ash transport in diesel particle filters |
A. Dittler |
SAE Technical Paper 2012-01-1732, doi:10.4271/2012-01-1732 |
| Comparison of different particle measurement techniques at a heavy-duty diesel engine test bed |
T. Michler, J Dörnhöfer, D. Erforth, A. Heinz, K. Scheiber, P. Weber, N. Nowak, H. Kubach, J. Meyer, T. Koch, A. Dittler |
SAE Technical Paper 2019-24-0158, 2019, doi: 10.4271/2019-24-0158 |
| In Situ Observation of Different Soot Layers in a Model Filter Channel during Its Regeneration |
Desens, O., Hagen, F.P., Meyer, J., and Dittler, A. |
SAE Technical Paper 2025-01-0312, 2025, doi:10.4271/2025-01-0312 |
| A novel apparatus for simultaneous Laser-light-sheet optical particle counting and video recording in the same measurement chamber at high temperature |
J. Zoller, A. Zargaran, K. Braschke, J. Meyer, Uwe Janoske, A. Dittler |
Sensors, 2022, 22, 1363, https://doi.org/10.3390/s22041363 (open access) |
| Oleophilic and oleophobic media combinations - Influence on oil mist filter operating performance |
T. Penner, J. Meyer, A. Dittler |
Separation and Purification Technology 2021, 261, 118255, https://doi.org/10.1016/j.seppur.2020.118255 |
| Methodology for the characterization of pleated filter media in a pulse-jet-cleaned test-rig in accordance to DIN ISO 11057 |
Knisley, J.P., Meyer, J., Dittler, A. |
Separation and Purification Technology, 2 January 2026, 136720, https://doi.org/10.1016/j.seppur.2025.136720 |
| On the accuracy of capillary flow porometry for fibrous filter media |
H.E. Kolb, R. Schmitt, A. Dittler, G. Kasper |
Separation and Purification Technology, 2018, 199, 198-205, https://doi.org/10.1016/j.seppur.2018.01.024 |
| Impact of operating conditions on the evolution of droplet penetration in oil mist filters |
T. Penner, J. Meyer, G. Kasper, A. Dittler |
Separation and Purification Technology, 2018, https://doi.org/10.1016/j.seppur.2018.10.037 |
| Relevance of downstream support structure design for oleophilic and oleophobic oil mist filter operating performance |
T. Penner, J. Meyer, A. Dittler |
Separation and Purification Technology, 2020, 248, 117074, https://doi.org/10.1016/j.seppur.2020.117074 |
| Interaction of water droplets with soluble filter cakes in gas cleaning applications |
A.D. Schwarz, J. Meyer, A. Dittler |
Separation and Purification Technology, 2021, https://doi.org/10.1016/j.seppur.2020.118128 |
| Influence of 3D printed downstream support structures on pressure drop and entrainment of oleophilic and oleophobic oil mist filters |
C. Straube, G. Yang, D. Voll, J. Meyer, P. Théato, A. Dittler |
Separation and Purification Technology, 2022, 290, 120802, https://doi.org/10.1016/j.seppur.2022.120802 |
| Influence of deposited liquid structures on the separation efficiency of thin oleophilic fiber layers of mist filters |
C. Straube, R. Mandic, J. Meyer, A. Dittler |
Separation and Purification Technology, 2023, 125977, https://doi.org/10.1016/j.seppur.2023.125977 |
| Investigation of the local oil distribution on oleophilic mist filters applying X-ray micro-computed tomography |
C. Straube, J. Meyer, A. Dittler |
Separation and Purification Technology, 2023, 311, 123279, https://doi.org/10.1016/j.seppur.2023.123279 |
| Detachment of particulate structures from a fiber array due to stretching and simultaneous gas flow |
L. Poggemann, P. Längle, J. Meyer, A. Dittler |
Separation and Purification Technology, 2024, 127887, https://doi.org/10.1016/j.seppur.2024.127887 (open access) |
| Drainage behavior and entrainment mechanisms in oil mist separation applications—A review |
R. Mandic, J. Meyer, A. Dittler |
Separation and Purification Technology, 2024, 130274, https://doi.org/10.1016/j.seppur.2024.130274 (open access) |
| Experimental and theoretical investigation of the pressure drop across different surface filter media at low absolute pressures down to 100 Pa |
V. Löschner, J. Meyer, A. Dittler |
Separation and Purification Technology, 2025, 131093, https://doi.org/10.1016/j.seppur.2024.131093 (open access) |
| Transition from clamshell to barrel shaped oil droplets on a single oleophobic fiber through periodic mechanical excitation |
F. Freese, A. Schwarzwälder, U. Janoske, A. Dittler |
Separation and Purification Technology, 2025, 133834, https://doi.org/10.1016/j.seppur.2025.133834 (open access) |
| Dust cake build-up on gas cleaning surface filters at ambient and low absolute pressure |
Löschner, V., Lüttmann, J., Meyer, J., Dittler, A. |
Separation and Purification Technology, 9 October 2025, 135536, https://doi.org/10.1016/j.seppur.2025.135536 |
| Droplet motion and detachment of individual oil droplets on a horizontally mounted oleophobic fiber under transverse gas flow |
Schwarzwälder, A., Meyer, J., Dittler, A. |
Separation and Purification Technology, Volume 389, 9 May 2026, 136767, https://doi.org/10.1016/j.seppur.2026.136767 |
| Identification of deposited oil structures on thin porous oil mist filter media applying μ-CT imaging technique |
C. Straube, J. Meyer, A. Dittler |
Separations 2021, 8, 193, https://doi.org/10.3390/separations8100193 (open access) |
| Experimental detection of particle structures detachment from a strectchable single fiber during multiple consecutive stretching cycles |
L. Poggemann, J. Meyer, A. Dittler |
Separations 2022, 9, 168, https://doi.org/10.3390/separations9070168 (open access) |
| Investigation of the rearrangement of reactive-inert particulate structures in a single channel of a wall-flow filter |
J.R.D. Thieringer, N. Hafen, J. Meyer, M.J. Krause, A. Dittler |
Separations 2022, 9, 195, https://doi.org/10.3390/separations9080195 (open access) |
| Influence of the filtration velocity on the local oil distribution of oleophilic coalescence filter media |
C. Straube, J. Meyer, A. Dittler |
Separations 2023, 10, 254, https://doi.org/10.3390/separations10040254 (open access) |
| Particulate matter detachment from a magnetizable single fiber applying magnetic forces in ambient air |
J. Szabadi, J. Meyer, A. Dittler |
Separations, 2023, 10, 297, https://doi.org/10.3390/separations10050297 (open access) |
| Morphology of particulate structures on a fiber array before and at clogging point of an aerosol filtration process |
L. Poggemann, B. King, J. Meyer, A. Dittler |
Separations, 2023, 10, 462, https://doi.org/10.3390/separations10090462 |
| Experimental investigations of the detachment of different particle structures from a magnetizable fiber in the gas phase |
J. Szabadi-Fuchs, J. Meyer, A. Dittler |
Separations, 2023, 10, 579, https://doi.org/10.3390/separations10120579 (open access) |
| The application of diesel particles filter - from past to present and beyond |
A. Dittler |
Topics in Catalysis, 2017, 60/3, 342-347 |
